| Audio Tweaks - Tweak Ref.
59 |
|
|
| |
| Securing bookshelf speakers with "Blue-tac" on stands |
| |
| 59 |
Richard Mui |
Very Good |
$10.00 |
| |
|
|
| |
| Make 3 "balls" of blue-tac about 5mm in diameter for each speaker. |
| |
| Put 2 of the blue-tac balls at the front bottom of the speaker and 1 at the back bottom. |
| |
| Then place the speakers on the stands as you normally would and press on the top of the speakers. Work better if you have a bubble-level on the top of the speakers so you can set the level at the same time. Don't forget to check the L/R speaker height and see if they are on the same vertical height. |
| |
| Much improved bass response from speaker/stand combination compared to simply placing speakers on stand. However, if the speakers' high frequency dispersion is no good to begin with, spikes will work better and the blue-tac treatment will tend to lessen high frequency. |
| |
|
| |
|
| |
| |
|
| Charlie T. |
Where
can I buy blue-tac? |
|
|
|
|
| |
|
|
|
